Payment & Shipping Terms:
|Case:||ABS-HB, Flame Retardant||Voltage:||12V|
12V 55AH HR Series High Rate Discharge Battery Rechargeable For Power Supply
1. Battery for solar Sealed/Maintenance–Free
The valve regulated spill proof construction allows trouble-free safe operation in
any position. There is no need to add electrolyte, as gases generated during
the charge phase are recombined in a unique “oxygen cycle”.
2. Long Shelf Life
A low self-discharge rate, up to approximately 3% per month, may allow storage
of fully charged batteries for up to a year, depending on storage temperatures,
before charging becomes critical.
3. Deep Discharge Recovery
Special separators, advanced plate composition and a carefully balanced
electrolyte system ensure that the battery has the ability to recover from
excessively deep discharge.
4.Low Pressure Valve Regulators
All batteries feature a series of low pressure one-way relief valves. These
valves safely release any excessive accumulation of gas inside the battery and
5.High Discharge Rate
Low internal resistance allows discharge currents of up to ten times the rated
capacity of the battery. Relatively small batteries may thus be specified in
applications requiring high peak currents.
|Nominal Voltage||12V||Nominal Capacity (C10)||55Ah (10.5V, at 25℃)|
|Nominal Power(15min)||210W/Cell (10.02V, at 25℃)||Weight||Approx. 18.5kg|
|Width 138mm||Internal Resistance||Approx. 10 mΩ (25℃)|
|Height 207mm||Max Charging Current||16.5A (25℃)|
|Total Height 228mm||Max Short-duration Discharge Current||1100A(25℃)|
|Charging Voltage||Standby Use||2.275±0.025V/cell (25℃)||Temperature Compensation||Standby Use||-3.3mV/℃/cell|
|Cyclic Use||2.45±0.05V/cell (25℃)||Cyclic Use||-5mV/℃/cell|
Feature & Advantage
Sealed and maintenance free, safety, no leakage
ABS containers and covers optional With safety valve
High quality and reliability
Exceptional deep discharge recovery
Flexible design for multiple installation
Wide operating temp. range
High capability, high energy density
Long service life
Excellent safety, discharging, shock-proof and impact proof performance
Good resistance to overdischarge, overcharge and high current
1.Telephone switchboard, electric equipments, medical equipments,
instruments, and meters
2.Computer, uninterrupted power source (UPS), Inverter
3. Power transmission and transformer station, switch control, and accident
4.Fire fighting, safety device, and alarm monitoring
5. Aviation, spaceflight, and power storage
6.Automatic office system
7. Radio communication system
8. Emergency lighting and car/ship starting system
9.Portable electric appliances and mining system
10. Traffic and navigation signal lamp
11.Solar/Wind/Hybrid power systems
1. The valve regulated sealed lead acid battery is maintenance free and without
acid adding, any top cover opening is forbidden during use.
2.Battery should be charged once every 6 months after leaving the factory.
3.Checking the battery appearance before using, and avoid strong vibration or
4.Recommend recycling using temperature 25℃ ± 5% , the battery is strictly
prohibited get wet in the rain and soaking.
5.Battery installation and removal should be uniform stress, stress at the shell
should be part of the battery, avoid damage the terminal.
6.If you need batteries in parallel, do not exceed three parallel.
7. When used in multiple circuits, it must be according to battery marks "+", "-" in
order of priority and space cannot be less than 15mm.
8.Before you connecting with device, make it disconnected, then connect battery
positive to the devices positive, negative connected to negative terminal, and fix
Contact Person: Song Gao