Payment & Shipping Terms:
|Product Name:||GEL6120AG||Application:||Solar, Wind, UPS, EPS|
|Size Of Battery:||151*50*95mm||Terminal:||FO-02/FO-03/FO-12|
6V12AH GEL6120AG GEL AGM Lead Acid Rechargeable Battery For Solar System
The unique construction and use waterproof battery cable to offer reliable
guarantee for stable operation of solar street lamp products.
Electrolyte Suspension System
All batteries utilize an electrolyte suspension system consisting of a high
porosity, glass fiber material which in conjunction with plates, totally absorb and
contain the electrolyte.
CGB batteries incorporate a built-in design that controls gas generation and
induces recombination of more than 99% of gases generated during float or
Maintenance Free Operation
There is no need to check specific gravity of the electrolyte or add water to
batteries during float service life. In fact, there is no provision for this type of
Low Pressure Valve Regulated System..
All batteries are equipped with safety release valves, designed to operate
between 1.5 and 6 psi (10-40kPa) and automatically reseal. Hence, there is
never an excessive accumulation of gas within the battery.
Heavy Duty Grids
Heavy duty lead calcium tin alloy grids provide an extra margin of performance
and service life in either float or cyclic applications.
Self Discharge - Shelf Life
The self discharge rate at room temperature is approximately 3% of rated
capacity per month.
CGB Batteries may be operated over a broad range of ambient temperatures.
Deep Discharge Recovery
The batteries recover their capacities even after repeated deep discharges.
|Nominal Voltage||6V||Capacity||C20||12Ah (5.25V, at 25℃)|
|Nominal Capacity (C20)||12Ah (5.25V,at 25℃)||C10||10.8Ah (5.25V, at 25℃)|
|Dimension||Length 151mm||C3||9Ah (5.25V, at 25℃)|
|Width 50mm||C1||7.2Ah (5.1V, at 25℃)|
|Height 95mm||Internal Resistance||Approx. 8 mΩ (25℃)|
|Total Height 101mm||Max Short-duration Discharge Current||360A(25℃)|
|Weight||Approx. 1.92kg||Terminal||FO-02 / FO-03 / FO-12|
Designed life for floating charge is 5 years (20℃)
Design with flat plate, GEL electrolyte and AGM separator technology
GEL electrolyte inside of battery keeps uniformity condition, battery is with
excellent cycle life
GEL electrolyte has huge thermal capacity, thermal runaway phenomena never
High strength ABS material for container & lid
Wide temperature scope of application(-15~45℃)
Best temperature of application(20±5℃)
No leaking, safe and reliable
Standing or lying down for using, convenient to transport and install
Low self-discharge rate.
Ensure that our operations and products meet or exceed government
Monitor, control and eliminate, where possible, all environmental emissions,
discharges and waste generated by our operations.
Develop products that will have a minimum effect on our environment.
portable TV,VTR,taperecorders,radio,pc,word processors,terminals,measuring
light for news cameras
children's toy riding cars
ups system for computer back up
off grid solar power and wind power installations
large-scale mateur robotics
ice monitoring station
recreational marine purpose
cell phone towers
Don’t charge in the sealed container.
Please use cotton cloth to clean, if the battery is broken down and leak
electrolyte. Please wash your skin when touch the electrolyte.
You should be careful and regular check when use the battery. To avoid the
battery don’t work. You should change the battery if the capacity is not full or has
been damage, especially after one year using.
Don’t put the battery in the fire, or it will explode.
Contact Person: Song Gao