Payment & Shipping Terms:
|Product Name:||HRL12103W||Application:||UPS , EPS|
|Size Of Battery:||166*175*125mm||Terminal:||RT-05/FP-01|
|Weight:||9.98 KG||Case:||ABS-HB, V0|
Banks Centre High Rate Lead Acid Battery 12V 25AH 103W Long Life
|Nominal Voltage||12V||Nominal Capacity (C20)||25Ah (10.5V, at 25℃)|
|Nominal Power(15min)||103W/Cell (10.02V, at 25℃)||Weight||Approx. 9.98kg|
|Width 175mm||Internal Resistance||Approx. 15 mΩ (25℃)|
|Height 125mm||Max Charging Current||7.5A (25℃)|
|Total Height 125mm||Max Short-duration Discharge Current||750A(25℃)|
|Charging Voltage||Standby Use||2.275±0.025V/cell (25℃)||Temperature Compensation||Standby Use||-3.3mV/℃/cell|
|Cyclic Use||2.45±0.05V/cell (25℃)||Cyclic Use||-5mV/℃/cell|
●The HRL (High Rate-Long Life) series is especially designed for high rate discharge applications. By using strong grids and specially designed active material, the HRL series offers stable Performance during high current discharge. It offers extremely high power output at 15 minutes backup time with 5~8 years (20℃) design longer life. It is highly suited for high rate UPS/EPS systems and power switchgear applications.
● Wide temperature scope of application (-15~45℃);
● Best temperature of application (20±5℃);
1. Standby power of electric power company, Telecom Company, Bank, Stock System and Security Company
2. Standby power of all kinds of emergency illumination and system
3. Uninterruptible Power Supply(UPS)
4. Standby power of guard against theft and alarm system
5. Power source for Power-assist vehicle, electromotive tool and toys
6. Standby power of solar energy system
7. Cable Television
8. Control Equipment
9. Medical Equipment
1. 23 years manufacturing sealed lead acid storage battery in China
2. Excellent recharge and discharge performance;
3. ISO9001, ISO14001, OHSAS18001, CE, UL, VDS Certificates
4. Good prices due to our own plate production capacity
5. High quality AGM separator, pure acid;
6. Competitive prices with reliable quality;
7. Maintenance-free operation - no addition of water to the electrolyte is required.
8. Extended service life due to low self-discharge levels.
(1) Charging voltage
After the battery is full converted to float charging, the float voltage is around 13.0V. If the charging voltage is too high will cause the battery overcharge, otherwise the battery will not be full charged. Charging voltage is abnormal, it may be caused by the battery configuration error, or it may be caused by controller failure. Do not choose the controller with bad quality.
(2) The depth of discharge
Depth of discharge of the battery life is also a important factor for lifetime of battery, the deeper the battery discharge, the fewer the number of cycles, so battery should avoided from deep discharge.
(3) Regular maintenance
Battery should be regular checked in every period time after used, such as check its outlook, measuring the average voltage of each battery, etc.