Payment & Shipping Terms:
|Product Name:||CB12F000F||Application:||UPS EPS Wind|
|Size Of Battery:||407*173*209.5mm||Terminal:||FP-05/RT-20|
CB121000F 12V100Ah VRLA Wind Supply Energy Storage AGM Battery
Sealed and maintenance free, safety, no leakage
ABS containers and covers optional
Safty valve installation of explosion proof
High quality and reliability
Exceptional deep discharge recovery
Flexible design for multiple installation
Wide operating temp. range
High capability, high energy density
More deep cycle times
Long service life, Excellent recharge and discharge performance
Sealed and maintenance free operation.
Non-Spillable construction design.
ABS containers and covers optional.
Safety valve installation for explosion proof .
High quality and high reliability.
Exceptional deep discharge recovery performance.
Low self discharge characteristic.
Flexibility design for multiple install positions.
|Nominal Voltage||12V||Capacity||C10||100Ah (10.5V, at 25℃)|
|Nominal Capacity (C10)||100Ah (10.5V,at 25℃)||C5||80Ah (10.5V, at 25℃)|
|Dimension||Length 407mm||C3||75Ah (10.5V, at 25℃)|
|Width 173mm||C1||55Ah (10.2V, at 25℃)|
|Height 209.5mm||Internal Resistance||Approx. 6 mΩ (25℃)|
|Total Height 234.5mm||Max Short-duration Discharge Current||2000A(25℃)|
UPS power supply system
EPS power supply system
DC power cabinet
Fire and Security System
Small power station etc.
Sealed construction,safty and no leakage
Maintenance-free,convenient for installation
Broad operating temperature range
High capability,high energy density
Low self-discharge tate,more deep cycle times
Long service life,excellent recharge and discharge time than other batteries
Valve Regulated Lead Acid (VRLA) Battery,Maintenance Free
Absorbent Glass Mat (AGM) Separators technology for high efficiency, gas
absorption of up to 98%
Mechanized production, COS technology, good conformance
No restrictions for rail, road, sea & air transport -Complies with IATA/ICAO
Special Provisions A67
Special designed grids for optimized high power density
Advanced lead tin calcium alloy, reduces grid corrosion & promotes long battery
Oversized partition intercell welds, providing low resistance connections &
minimal power loss
Performance excels at high rates of discharge & recharge
High integrity post seal for long life
Vent Valve - allows the release of excess gases & prevents case rupture
Don’t near the hot source and don’t under the sunshine.
Don’t charge in the sealed container.
No short circuit. It should be addition charge if you don’t use, and single charge
per three months, to avoid irreversible sulfating. The battery should be changed
when the battery jar broken or the electrolyte omitted, to avoid acid corrosion.
Don’t store in the space of acid gas.
Contact Person: Song Gao