Payment & Shipping Terms:
|Product Name:||GEL12100AG||Application:||UPS, Solar, Wind|
|Size Of Battery:||151*98*94.5mm||Terminal:||FO-02/FO-03|
ABS Plastic AGM Storage GEL Lead Acid Battery recharge GEL12100AG 12V 10AH
The unique construction and sealing techniques of the battery guarantee leak
proof operation in any position with no adverse effect to capacity or service life.
Electrolyte Suspension System
All batteries utilize an electrolyte suspension system consisting of a high
porosity, glass fiber material which in conjunction with plates, totally absorb and
contain the electrolyte.
CGB batteries incorporate a built-in design that controls gas generation and
induces recombination of more than 99% of gases generated during float or
Maintenance Free Operation
Due to the perfectly sealed construction and the recombination of gasses within
the cells, the battery is almost maintenance free.
Low Pressure Valve Regulated System..
All batteries are equipped with safety release valves, designed to operate
between 1.5 and 6 psi (10-40kPa) and automatically reseal. Hence, there is
never an excessive accumulation of gas within the battery.
Heavy Duty Grids
Heavy duty lead calcium tin alloy grids provide an extra margin of performance
and service life in either float or cyclic applications.
Cyclic Service Life
More than 600 discharge/recharge cycles can be realized from CGB CB and HR
batteries, dependent on the average depth of discharge.
Float Service Life
SE and CB, HR Series batteries have an expected life span of 3 to 5 years in
float service applications.
Self Discharge - Shelf Life
The self discharge rate at room temperature is approximately 3% of rated
capacity per month.
CGB Batteries may be operated over a broad range of ambient temperatures.
Deep Discharge Recovery
The batteries recover their capacities even after repeated deep discharges.
|Nominal Voltage||12V||Capacity||C20||10.0Ah(10.5V, at 25℃)|
|Nominal Capacity (C20)||10Ah (10.5V,at 25℃)||C10||9.0Ah(10.5V, at 25℃)|
|Dimension||Length 151mm||C3||7.5Ah(10.5V, at 25℃)|
|Width 98mm||C1||6.0Ah(10.2V, at 25℃)|
|Height 94.5mm||Internal Resistance||Approx. 15 mΩ (25℃)|
|Total Height 100mm||Max Short-duration Discharge Current||300A(25℃)|
|Weight||Approx. 3.48kg||Terminal||FO-02/FO-03/ FO-12|
Designed life for floating charge is 5 years (20℃)
Design with flat plate, GEL electrolyte and AGM separator technology
GEL electrolyte inside of battery keeps uniformity condition, battery is with
excellent cycle life
GEL electrolyte has huge thermal capacity, thermal runaway phenomena never
High strength ABS material for container & lid
Wide temperature scope of application(-15~45℃)
Best temperature of application(20±5℃)
No leaking, safe and reliable
Standing or lying down for using, convenient to transport and install
Low self-discharge rate.
Solar system and Wind system
Emergency lighting equipment
Fire alarm and security systems
Electric equipment and telemeter equipment
Wireless lawn movers vacuum cleaner and washing machine
Toys and consumer electronics
Portable power tools measuring and medical equipment Portable video
camera portable personal computer
Tips and Precaution
Heat kills batteries. Avoid installation and/or operation in close proximity to heat
sources of any kind. While the operating temperature range is -15°C to 45°C,
and ideal service life will be realized when the battery is operated in an ambient
temperature of 20°C (for cyclic service applications, a range of 5°C to 35°C is
If the battery is to be installed in an air or water tight container, ventilation must
be provided. Batteries may generate ignitable gases which must not be
contained. Because of this, batteries should not be installed near spark
Avoid installing the battery in an atmosphere where organic solvents or
adhesives may be present. Do not clean the battery with oils, thinners or similar
substances. Use water only. The case and cover of the battery is ABS plastic
resin which may suffer damage from these chemicals.
Contact Person: Song Gao