Payment & Shipping Terms:
|Product Name:||CBL12500||Application:||UPS , EPS|
|Size Of Battery:||229*138*207*228mm||Terminal:||FP-22/ FP-14, FP-15/RT-38|
|Weight:||16.2 KG||Case:||ABS-HB, V0|
vrla deep cycle battery,
sealed vrla battery
Control Systems Valve Regulated Lead Acid Rechargeable Battery Sla 12V 50Ah
|Nominal Capacity (C10)||50Ah (10.5V,at 25℃)|
|Terminal||FP-22/ FP-14, FP-15/RT-38|
|Internal Resistance||Approx. 10 mΩ (25℃)|
|Max Charging Current||15A|
● Designed life for floating charge is 5-8 years (20℃);
●Special formula of grid alloys and lead paste, special manufacturing technique, to make sure the high quality, high performance and long life;
● Wide temperature scope of application (-15~45℃);
● Best temperature of application (20±5℃);
● Standing or lying down for using, convenient to transport and install;
● High sealed reaction efficiency, little loss of water, no need to add distilled water or electrolyte, simple to use and maintain;
Control systems, Electric toys, Emergency lamp, Power tools, Medical treatment equipment, Alarm system, Emergency light system, Standby power supply, UPS and computer standby power supply, Power system, Telecommunication system, Firefighting equipment standby power supply, Railway station, Ship Equipment, Military Equipment, Telephone switching system.
(1) Battery Installation
Batteries should be installed possibly in a clean, cool, ventilated and dry place. The battery should be placed upright. Each terminal between the batteries is connected firmly.
(2) The ambient temperature
Ambient temperature is important factor for the battery operation. When the ambient temperature is too high, Battery plate corrosion will be increased, while absorbing more moisture; When the ambient temperature is too low, the battery will not be full charged. All this will affect the battery life. Therefore we suggest the working ambient temperature is around 25 º C.
(3) The charge and discharge current
Battery charge and discharge current usually uses the concept C, the actual value of C is related to the capacity of the battery. For example, a 100AH battery: 1C = 100A. Charging current is around 0.1C; The charging current must not be bigger than 0.3C. Discharge current general requirements in 0.05 ~ 3C range.